ISO Issued New Toy Safety Standard ISO 8124-3:2020/ Amd 1:2023
Release Time:2023-04-18
On March, 2023,the International Standards Organization (ISO) issued a new versionofthe standard ISO 8124-3:2020/Amd 1:2023 Safety of toys-Part 3: Migration of certain elements.Thenew versioneffect immediately.
Compared with the old version, the new version of ISO 8124-3:2020/Amd 1:2023 is revised as follows:
Introduction/Clause/Subclause/Annex/Bibliography
Change
Introduction
Added the following content: — 30,0 µg for boron
Clause 3
Added definitions of clause 3.13 slime and clause 3.14 modelling clay and putty
Clause 4.2
Replace Table 1 and Table 2 ,the new tables are shown in table 1 and table 2.
Clause 9.8.1
Added the following content: Slime is not to be dewaxed.
Annex D3
Added the following content:
Explain the reasons for the migration limit of barium (Ba) in molded clay has been raised from 250mg/kg to 350mg/kg;
Explain the reasons for the maximum migration limit requirement for boron (B) added to molded clay, putty and slime.
Bibliography
Added bibliography: [9] Guidelines for drinking-water quality: fourth edition incorporating the first addendum. Geneva: World Health Organization;2017.
Table 1 Maximum acceptable element migration from toy materials (mg/kg)
Toy material
Element
Sb
As
Ba
Cd
Cr
Pb
Hg
Se
B
Any toy material given in Clause 1,
except modelling clay and putty, finger paint,and slime
Xinyuhuan staff will contact you for detailed information and provide you with a quotation. You can tell us your needs by calling: 400 089 2118 or filling out the form below.